Search results for 'starrett sm412wmerl'

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  1. Levels

    Levels
    Brand: Starrett
    Model: 98-4

    $109.00

    These levels have ground and graduated main vials. All sizes have a cross test vial except the 4” (100mm) model. The 12” (300mm) model also has a plumb vial and the 18” (450mm) size has a double plumb vial. These vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage. The base of the levels features an in volute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting. With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work. The 6” through 18” (150-450mm) main level vials have graduations that are approximately 80-90 seconds or .005” per foot (0.42mm per meter). There are five, six, or seven lines on each side of the bubble, depending on the base length. Size: 4” (100mm) Without cross test vial Learn More
  2. 1-2" Disc-type Micrometers

    1-2" Disc-type Micrometers
    Brand: Starrett
    Model: 256RL-2

    Regular $342.00

    Special $235.00

    Disc-Type Micrometers with rotating or non-rotating spindles *Ratchet stop, lock nut *Range: 1-2” Features: These tools are used to measure the thickness of work sections such as ribs, lands, fins, cutting edges on form tools, and chordal thickness of gear teeth. Because of their large anvil and spindle faces, the 1” and 25mm sizes are also useful for measuring the thickness of sheet materials like paper, cardboard, rubber, and plastics. Readability Features -Starrett satin chrome finish – no glare – resists rust -Advanced sleeve design with staggered lines and distinct figures for precise and easy readability -Quick-reading figures – every thousandth numbered on inch tools -Convenient decimal equivalents on 1and 2 reading tools Ease-of-Handling Features -Balanced frame and thimble design insure easy handling and better readability -Ring-type knurled lock nut for quick and sure locking -The combination ratchet and speeder for uniform pressure and quicker adjustment on all sizes -Gracefully designed tapered frame for use in narrow slots and tight places -Anvil and spindle discs are ½ (12.7mm) diameter tapering to .015 (0.4mm) edge thickness making it possible to enter narrow grooves and recesses -Available in the 1” and 25mm sizes with rotating or non-rotating spindle Accuracy and Long-Life Features -Rigid one-piece frame of drop forged steel -Extremely hard and stable one-piece spindle (the heart of our accuracy) -Micro-lapped measuring faces -Quick and easy adjustment -Starrett workmanship -This tool is accurate to ±.00015 or ± 0.003mm measuring over the whole surface and ±.0002 or ±0.004mm measuring on the edges 1” and 25mm sent in fitted case. Deluxe case available by ordering No. 910 ,EDP 55397. Learn More
  3. .060" Dial Test Indicators

    .060" Dial Test Indicators
    Brand: Starrett
    Model: R811-1PZ

    Regular $426.00

    Special $328.00

    These are some of the most versatile and unique indicators available because the handy swivel head feature allows positioning to suit your line of sight from horizontal to vertical and at any angle in between 90 degrees. Additional features and benefits include: -Two positioning mounts work with existing dovetail test indicator accessories -Contacts are frictionally adjustable and replaceable -Contact point reverses, always maintaining clockwise hand rotation -Contacts also available individually in steel, carbide and difference sizes as listed. -Smooth, jeweled movement -Large, 1 3/8" (35mm) dial diameter for increased readability -Red dial Specifications: Graduation: .001" Dial Reading: 0-30-0 -In case, but with no attachments Learn More
  4. 6" Dial Calipers

    6" Dial Calipers
    Brand: Starrett
    Model: 1202-6

    $102.00

    With the ability to provide quick, accurate measurement of O.D., I.D. and depth, the dial caliper is the most versatile precision hand tool on the market. No. 1202 Dial Calipers are based on the caliper that has been the first choice of metal working professionals for decades. No. 1202 Dial Calipers are available in 4”, 6”, 8” and 12” versions. Readability Features -Sharp, clear dial graduations of .001” with .100” per revolution (except for the 1202F Model – see below) -Sharp, black graduations on the satin finished bar, every .100” Ease-of-Handling Features -Knife-edge contacts -Thumb-operated fine adjustment roll -Adjustable bezel -Lock screws for sliding jaw and dial bezel -Covered rack depth rod (4”, 6” and 8” models) Accuracy and Long-Life Features -Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod -Positive, spring-loaded double pinion anti-backlash control Learn More
  5. 9" Dial Calipers

    9" Dial Calipers
    Brand: Starrett
    Model: 120A-9

    Regular $305.00

    Special $296.00

    9” Dial Caliper -The only American made dial caliper. This is one of the handiest measuring tools available, used by mechanics and toolmakers everywhere. It is a direct reading, reliable and accurate. Readability Features -Sharpe clear dial graduations of .001” -.100” in one revolution -Sharp, black graduations of .100” -Choice of black, red or white inch dials. Ease of handling features -Knife edge contacts for both inside and outside measurement -One hand use with thumb operated, fine adjustment roll. -Lock screw for dial bezel -Lock screw for holding the sliding jaw in position. -Covered rack depth rod -Parallel lines can be scribed on a work piece by setting the caliper jaw to the required dimensions, locking the movable jaw with the lock screw and then using the front edge of the fixed jaw as the scribing surface. Accuracy and Long-Life Features -Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod. -Positive, split gear anti-backlash control. -Rack teeth point down to make it easy to shed foreign matter and thereby keep the area clean. -Without case Approximate jaw depths: Outside: 1 ½” (38mm) Inside: 5/8” (16mm) Learn More
  6. 6" Electronic Calipers

    6" Electronic Calipers
    Brand: Starrett
    Model: 799A-6/150

    $109.00

    Starrett’s 799 Series Electronic Calipers are light, comfortable, easy-to-use, and constructed with features that have made Starrett slide calipers the machinist’s first choice for many years. The 799 offers a slim, streamlined profile, a large, clear, easy-to-read LCD display, long battery life, and function buttons for zero and inch/mm. 799 calipers are available in 0-6", 0-8", and 0-12" sizes and the newly available Extended Range 24" and 40". All sizes furnished in a fitted, protective case. Features (all sizes) - Lightweight, ergonomic design - Inch/millimeter conversion reads .0005" or 0.01mm - Easy access to the single, long-life battery - Last measuring position retained when shut off - Hardened stainless steel body for long life - Fine adjustment thumb wheel - Lock screw to hold the slide in position - Resolution is .0005" (0.01mm) - Zero at any position 6", 8" & 12" Calipers Only - Large easy-to-read LCD, .32" high characters - Automatic shut-off after 5 minutes of nonuse - Linear accuracy meets DIN862 - Integrated depth rod Learn More
  7. 6" Electronic Calipers

    6" Electronic Calipers
    Brand: Starrett
    Model: 798B-6/150

    $243.00

    -Large, easy to read LCD, .310" character height -IP67* level of protection against coolant, water, dirt and dust -Induction type linear encoder system -Data Output- Patented non-contact RS-232 -Heavy-duty bar and slide, 3.5mm thick -Hardened stainless steel measuring surfaces for long life -Fine adjustment -Slide lock -Linear accuracy meets DIN862 -.0005" (0.010mm) resolution -CR2032 3V battery (> 1 year battery life under normal use) -In/mm conversion -Zero at any position -Automatic shutoff of the display after 30 minutes of non-use -Reactivation of display with movement of slide with no loss of position -798B Calipers output data to Starrett SPC Plus hardware and software and to PCs and work well with Starrett Datasure® Wireless Data Collection Systems Learn More
  8. 5m-16' Tape Measures

    5m-16' Tape Measures
    Brand: Starrett
    Model: 5m-16' Pro-Site

    $17.00

    -Nylon Coated Blade -Shock absorbing bumper -High visibility, ergonomic, impact resistant case. Reliant Tru-Lok gives positive locking. Tough Tip stainless steel blade protector. Hook self adjusts for inside and outside measurements. -8' blade standout Learn More
  9. 8m-26' Tape Measures

    8m-26' Tape Measures
    Brand: Starrett
    Model: 8m-26' Pro-Site

    $21.00

    -Nylon Coated Blade -Shock absorbing bumper -High visibility, ergonomic, impact resistant case. Reliant Tru-Lok gives positive locking. Tough Tip stainless steel blade protector. Hook self adjusts for inside and outside measurements. -8' blade standout Learn More
  10. 0-1" Stainless Steel Micrometer Head

    0-1" Stainless Steel Micrometer Head
    Brand: Starrett
    Model: 1263L

    $134.00

    -Rust-resistant stainless steel -Advanced sleeve design with staggered lines and distinct figures for precise and easy readability -Quick-reading figures -Extremely hard and stable one-piece spindle (the heart of our accuracy and long life) -Micro-lapped measuring face for flatness and squareness -Quick and easy adjustment Learn More

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction