Micrometers

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. 0-1" Digimatic Micrometers

    0-1" Digimatic Micrometers
    Brand: Mitutoyo
    Model: 293-340-30

    $163.00

    -IP65 protection level, enabling use in environments exposed to cutting oil, etc*. *Anti-corrosion treatment is required after use. -Measurement data output function is available with a water-resistant connection cable. -Auto power ON/OFF function. • Certificate of inspection* is included. (50mm/2” or less range models) *It is not the type used to obtain calibration certificates. -With a standard bar except for 0-25mm/0-1" model. -Supplied in fitted case. Plastic case up to 150mm/6", Technical Data Accuracy: .00005” Resolution: .00005"/0.001mm Flatness: 0.3µm/.000012” Parallelism: 1µm/.00004” for models up to 50mm/2” 2µm/.00008” for models up to 100mm/4” 3µm/.00012” for models up to 175mm/7” 4µm/.00016” for models up to 275mm/11” 5µm/.0002” for models over 300mm/12” Measuring faces: Carbide tipped Display: LCD Battery: SR44 (1 pc.), 938882 Battery life: Approx. 1.2 years under normal use Dust/Water protection level: IP65 Function Origin-set, Zero-setting, Automatic power on/off, Data hold, Data output, inch/mm conversion (inch/mm models) Alarm: Low voltage, Counting value composition error Optional Accessories 05CZA662: SPC cable with data switch (1m/40”) 05CZA663: SPC cable with data switch (2m/80”) Learn More
  2. 1-2" Disc-type Micrometers

    1-2" Disc-type Micrometers
    Brand: Starrett
    Model: 256RL-2

    Regular $342.00

    Special $235.00

    Disc-Type Micrometers with rotating or non-rotating spindles *Ratchet stop, lock nut *Range: 1-2” Features: These tools are used to measure the thickness of work sections such as ribs, lands, fins, cutting edges on form tools, and chordal thickness of gear teeth. Because of their large anvil and spindle faces, the 1” and 25mm sizes are also useful for measuring the thickness of sheet materials like paper, cardboard, rubber, and plastics. Readability Features -Starrett satin chrome finish – no glare – resists rust -Advanced sleeve design with staggered lines and distinct figures for precise and easy readability -Quick-reading figures – every thousandth numbered on inch tools -Convenient decimal equivalents on 1and 2 reading tools Ease-of-Handling Features -Balanced frame and thimble design insure easy handling and better readability -Ring-type knurled lock nut for quick and sure locking -The combination ratchet and speeder for uniform pressure and quicker adjustment on all sizes -Gracefully designed tapered frame for use in narrow slots and tight places -Anvil and spindle discs are ½ (12.7mm) diameter tapering to .015 (0.4mm) edge thickness making it possible to enter narrow grooves and recesses -Available in the 1” and 25mm sizes with rotating or non-rotating spindle Accuracy and Long-Life Features -Rigid one-piece frame of drop forged steel -Extremely hard and stable one-piece spindle (the heart of our accuracy) -Micro-lapped measuring faces -Quick and easy adjustment -Starrett workmanship -This tool is accurate to ±.00015 or ± 0.003mm measuring over the whole surface and ±.0002 or ±0.004mm measuring on the edges 1” and 25mm sent in fitted case. Deluxe case available by ordering No. 910 ,EDP 55397. Learn More
  3. 0-6"/0-150mm Digimatic Micrometers

    0-6"/0-150mm Digimatic Micrometers
    Brand: Fowler
    Model: 54-225-456

    $210.00

    Special Features: • Range: 0—6"/150mm • 4" Base: Hardened tool steel, precision ground & micro-lapped. • Water Resistant to IP54 specifications. • True inch/metric conversion • Resolution: .00005"/.001mm • Direct RS232 output • Large easy-to-read LCD display • Easy, snap-fit rod insertion • Supplied in fitted case. Learn More
  4. 0-6" Depth Micrometers

    0-6" Depth Micrometers
    Brand: Starrett
    Model: 445AZ-6RL

    $294.00

    The depths of holes, slots, shoulders and projections can be measured to .001" or .01mm with these fine tools. The No. 445 gages are furnished with choices of 3" (75mm), 4" (100mm) and 6" (150mm) bases and have 5/32" (4mm) diameter measuring rods. -The combination ratchet and speeder for uniform pressure and quicker adjustment -Ring-type lock nut for quick and sure locking. -Base Size: 3" -6 rods -Rod Diameter: 5/32" -With ratchet stop, lock nut, and case Learn More
  5. 0-3" Depth Micrometers

    0-3" Depth Micrometers
    Brand: Starrett
    Model: 445AZ-3RL

    $245.00

    The depths of holes, slots, shoulders and projections can be measured to .001" or .01mm with these fine tools. The No. 445 gages are furnished with choices of 3" (75mm), 4" (100mm) and 6" (150mm) bases and have 5/32" (4mm) diameter measuring rods. -The combination ratchet and speeder for uniform pressure and quicker adjustment -Ring-type lock nut for quick and sure locking. -Base Size: 3" -3 rods -Rod Diameter: 5/32" -With ratchet stop, lock nut, and case Learn More
  6. 0-1" Tube Micrometers

    0-1" Tube Micrometers
    Brand: Starrett
    Model: 569AXP

    Regular $189.00

    Special $134.00

    The Starrett 569 Tube Micrometer is used for measuring the wall thickness of tubing and other parts with cylindrical walls. Also for measuring from a hole to an edge (note minimum hole sizes in table). Rigid steel “half” frame with smooth black enamel finish. Anvil diameter = 0.185". •Advanced sleeve design with staggered lines and distinct figures for precise and easy readability •Convenient decimal equivalents on inch tools •Balanced frame and thimble design ensure easy handling and better readability •Quick and easy adjustment •Starrett satin chrome finish – no glare – resists rust •Rigid steel frame ribbed for strength and stability •Extremely hard and stable one-piece spindle •Micro-lapped measuring faces •Micrometer Type: Tube Micrometer •Range (in): 0-1" •Graduations (in): 0.001" •Anvil/Spindle Material: Carbide •Anvil Type: 3/16' Post •Spindle Type: Flat Learn More
  7. 0-1" Tube Micrometers

    0-1" Tube Micrometers
    Brand: Starrett
    Model: 569BXP

    Regular $189.00

    Special $136.00

    The Starrett 569 Tube Micrometer is used for measuring the wall thickness of tubing and other parts with cylindrical walls. Also for measuring from a hole to an edge (note minimum hole sizes in table). Rigid steel “half” frame with smooth black enamel finish. Anvil diameter = 0.185". •Advanced sleeve design with staggered lines and distinct figures for precise and easy readability •Convenient decimal equivalents on inch tools •Balanced frame and thimble design ensure easy handling and better readability •Quick and easy adjustment •Starrett satin chrome finish – no glare – resists rust •Rigid steel frame ribbed for strength and stability •Extremely hard and stable one-piece spindle •Micro-lapped measuring faces •Micrometer Type: Tube Micrometer •Range (in): 0-1" •Graduations (in): 0.001" •Anvil/Spindle Material: Carbide •Anvil Type: 3/8" Post •Spindle Type: Flat Learn More
  8. 0-1" Outside Micrometers

    0-1" Outside Micrometers
    Brand: Starrett
    Model: 256PN-1

    $354.00

    These tools are used to measure the thickness of work sections such as ribs, lands, fins, cutting edges on form tools, and chordal thickness of gear teeth. Because of their large anvil and spindle faces, the 1” and 25mm sizes are also useful for measuring the thickness of sheet materials like paper, cardboard, rubber and plastics. Readability Features -Starrett satin chrome finish-no glare-resists rust. Advanced sleeve design with staggered lines and distinct figures for precise and easy repeatability. Learn More
  9. 0-1" Outside Micrometers

    0-1" Outside Micrometers
    Brand: Mitutoyo
    Model: 103-260-99

    $77.00

    Mitutoyo 103-260-99 Outside Micrometer, Baked-enamel Finish, Ratchet Stop, 0-1" Range, 0.0001" Graduation, +/-0.0001" Accuracy Learn More
  10. 0-1" Hub Micrometers

    0-1" Hub Micrometers
    Brand: Starrett
    Model: 228XRL

    $414.00

    The Starrett 228 Hub Micrometer features ratchet stop, lock nut and a carbide face. •Quick and easy adjustment •Advanced sleeve design with staggered lines and distinct figures for precise, easy readability •Balanced frame design for comfortable, accurate measuring •Quick-reading figures – every thousandth numbered on inch tools •No glare Starrett satin chrome finish •One-piece frame of drop forged steel •Extremely hard and stable one-piece spindle •Ring-type knurled lock nut for quick and sure locking •Combination ratchet and speeder for uniform pressure and quick adjustment •Micro-lapped carbide measuring faces •Micrometer Type: Hub Micrometer •Range (in): 0-1" •Graduations (in): .001" •Anvil/Spindle Material: Carbide •Anvil Type: Flat •Spindle Type: Flat •Lock Nut Type: Knurled Ring Type •Thimble Type: Ratchet Learn More

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction